Release Notes

1065 | show ap mesh-ht-ssid-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Column Description
40 MHz channel usage
This parameter shows if the profile enables or
disables the use of 40 MHz channels.
BA AMSDU Enable
Shows of the AP has enabled or disabled the
ability to receive AMSDU in BA negotiation.
Temporal Diversity Enable
Shows if temporal diversity has been enabled
or disabled. When this feature is enabled and
the client is not responding to 802.11 packets,
the AP will launch two hardware retries; if the
hardware retries are not successful then it
attempts software retries.
High throughput enable (SSID)
Shows if 802.11n high-throughput features are
enabled or disabled for this profile. By default,
high-throughput features are enabled.
Legacy stations
Allow or disallow associations from legacy
(non-HT) stations. By default, this parameter is
enabled (legacy stations are allowed).
Low-density Parity Check
If enabled, the AP will advertise Low-density
Parity Check (LDPC) support. LDPC improves
data transmission over radio channels with
high levels of background noise.
Maximum number of spatial streams
usable for STBC reception
Shows the maximum number of spatial
streams usable for STBC reception. 0 disables
STBC reception, 1 uses STBC for MCS 0-7.
Higher MCS values are not supported.
(Supported on the W-AP90 series, W-AP130
Series, W-AP68, W-AP175 and W-AP105 only.
The configured value will be adjusted based
on AP capabilities.)
NOTE: If transmit beamforming is enabled,
STBC will be disabled for beamformed frames.
Maximum number of spatial streams
usable for STBC transmission
Shows the maximum number of spatial
streams usable for STBC transmission. 0
disables STBC transmission, 1 uses STBC for
MCS 0-7. Higher MCS values are not
supported. (Supported on W-AP90 series, W-
AP175, W-AP130 Series and W-AP105 only.
The configured value will be adjusted based
on AP capabilities.)
NOTE: If transmit beamforming is enabled,
STBC will be disabled for beamformed frames.
MPDU Aggregation
Shows if the profile enables or disables MAC
protocol data unit (MPDU) aggregation.
Max received A-MPDU size
Configured maximum size of a received
aggregate MPDU, in bytes.
Max transmitted A-MPDU size
Configured maximum size of a transmitted
aggregate MPDU, in bytes.