Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ids impersonation-profile | 893
The output of this command includes the following parameters:
Related Commands
Configure IDS impersonation profiles using the command ids impersonation-profile.
Command History
Command Information
Parameter Description
Detect AP Impersonation Shows of the profile has enabled or disabled detection of AP impersonation.
Protect from AP
Impersonation
Shows if AP impersonation is enabled or disabled for the profile. When AP impersonation
is detected, both the legitimate and impersonating AP are disabled using a denial of
service attack.
Beacon Diff Threshold Percentage increase in beacon rates that triggers an AP impersonation event.
Beacon Increase Wait
Time
Time, in seconds, after the beacon difference threshold is crossed before an AP
impersonation event is generated.
Detect AP Spoofing AP Spoofing detection is enabled
Detect Beacon Wrong
Channel
Disable detection of beacons advertising the incorrect channel
Beacon Wrong Channel
Detection Quiet Time
Wait 90 seconds after detecting a beacon with the wrong channel after which the check
can be resumed.
Detect Hotspotter
Attack
Enable detection of the Hotspotter attack to lure away valid clients.
Hotspotter Quiet Time Wait 90 seconds after detecting an attempt to Use the Hotspotter tool against clients.
Version Description
ArubaOS 3.0 Command Introduced
ArubaOS 6.0 Refreshed show output
Platforms Licensing Command Mode
Available on all platforms Requires the RFprotect license Config mode on master controllers