Reference Guide

838 | show datapath Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
ip-mcast
destination
group
Displays the data path IP multicast table statistics. These include source, group. VLAN and
destination.
ip-reassembly Displays the contents of the IP Reassembly statistics tables.
ap-name <ap-name> Name of the AP.
counters IP reassembly counters.
ip-addr <ip-address> IP address of the AP
ipv4 Displays the IPv4 contents of the IP Reassembly statistics table.
ipv6 Displays the IPv6 contents of the IP Reassembly statistics table.
ipv6-mcast
destination
group
Displays the data path IP multicast table statistics. These include source, group. VLAN and
destination.
lag table Displays contents of the datapath link aggregation group (LAG) or port channel table.
message-queue counters Displays statistics of messages received by a CPU from other datapath CPUs (only CPUs
that receive messages and non-zero statistics are shown).
maintenance counters Displays datapath maintenance statistics.
nat Displays the contents of the datapath NAT entries table. It displays NAT pools as
configured in the datapath. Statistics include pool, SITP start, SIP end and DIP.
ap-name <ap-name> Name of AP.
counters Nat counters.
ip-addr <ip-address> IP address of the AP.
port table Displays the datapath port-vlan untrusted status and table session entries.
untrusted-vlan <slot/
port>
Show if there are untrusted vlan entries for the indicated slot and port.
vlan-table <slot/
port>
Displays the VLAN and its corresponding Session ACL for a particular slot and port.
rap-bw-resv
ap-name
ip-addr
Displays the remote AP uplink BW reservation statistics of the RAP only.
rap-pkt-trace
ap-name
ip-addr
Displays the remote AP packet-trace statistics of the RAP only.
rap-stats
ap-name
ip-addr
Displays the remote AP statistics of the RAP only.
route Displays datapath route table statistics.
ap-name <ap-name> Name of the AP.
counters Displays route table statistics such as current entries, high water mark, maximum entries,
total entries, allocation failures and max link length.
ip-addr <ip-address> IP address of the AP.
ipv4 Displays datapath IPv4 routing table.
Parameter Description