Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide remote-node-profile | 453
uplink {cellular priority <prior>}|disable|enable|{wired priority <prior>}|{wired
vlan <id>}
validate
vlan
<id> [<description>]|[<name> <vlan-ids>]|[range <range>]|[wired aaa-
profile <profile>]
vrrp <id> {advertise <interval>|authentication <password>|description <text>|ip
address <ipaddr>|preempt|priority <level>|shutdown} tracking interface {fastethernet
<slot>/<port>|gigabitethernet <slot>/<port>}{sub <value>}|tracking master-up-time
<duration> add <value>|tracking vlan <vlanid> {sub <value>}|tracking vrrp-master-
state <vrid> add <value>|vlan <vlanid>}
Description
The remote-node-profile command lets you create a Remote Node profile. Once in Remote Node profile
configuration mode, you can issue any of the following commands to define the values you want to assign to that
profile.