Reference Guide

250 | ids ap-classification-rule Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
Once you have created an AP classification rule, but must ienable it by adding it to the IDS AP Matching Rules
profile:
ids ap-rule-matching
rule-name <name>
SSID specification
Each rule can have up to 6 SSID parameters. If one or more SSIDs are specified in a rule, an option of whether to
match any of the SSIDs, or to not match all of the SSIDs can be specified. The default is to check for a match
operation.
SNR specification
Each rule can have only one specification of the SNR. A minimum and/or maximum can be specified in each rule
and the specification is in SNR (db).
Discovered-AP-Count specification
Each rule can have only one specification of the Discovered-AP-Count. Each rule can specify a minimum or
maximum of the Discovered-AP-count. The minimum or maximum operation must be specified if the
Discovered-AP-count is specified. The default setting is to check for the minimum discovered-AP-count.
Example
The following example configures the AP Configuration Rule Profile named “rule1”, then enables the rule by
adding it to the IDS AP Matching Rules profile.
(host) (config) #ids ap-classification-rule rule1
(host) (IDS AP Classification Rule Profile "rule1") #check-min-discovered-aps
(host) (IDS AP Classification Rule Profile "rule1") #classify-to-type neighbor
(host) (IDS AP Classification Rule Profile "rule1") !
(host) (config) #ap-rule-matching rule-name rule1
Command History
Command Information
Release Modification
ArubaOS 6.0 Command introduced
Platforms Licensing Command Mode
Available on all platforms Requires the RFprotect license Config mode on master controllers