Reference Guide

192 | crypto isakmp policy Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
The CLI will enter config-isakmp mode, which allows you to configure the policy values.
Example
The following command configures an ISAKMP peer IP address and subnet mask.. After configuring an ISAKMP
address and netmask, you are prompted to enter the IKE preshared key.
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.1 The following parameters were introduced.
 authentication ecdsa-256
 authentication ecdsa-384
 hash sha1-96
 hash sha2-256-128
 hash sha2-384-192
 prf
Platforms Licensing Command Mode
All platforms The following settings require the Advanced Cryptogram (ACR) license:
 hash algorithm: SHA-256-128, SHA-384-192
 Diffie-Hellman (DH) Groups: 19 and 20
 Pseudo-Random Function (PRF): PRF-HMAC-SHA256, PRF-HMAC-SHA384
 Authentication: ecdsa-256 and ecdsa-384
All other parameters are supported in the base OS.
Config mode on
master controllers
(host)(config) #crypto isakmp policy1
(host)(config-isakmp) #auth rsa-sig
lifetime 86400