Reference Guide

158 | clear Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
datapath Clears all configuration values and statistics for the following datapath modules.
 application
 bridge
 bwm
 crypto
 dma
 frame
 hardware
 ip-reassembly
 maintenance
 message-queue
 route
 route-cache
 session
 station
 tunnel
 user
 wifi-reassembly
 wmm
dot1x Clears all 802.1x specific counters and supplicant statistics. Use the following parameters:
 counters
 supplicant-info
fault Clears all SNMP fault configuration.
gap-db Clears global AP database. This command is often used to clear all stale AP records. Use the
following parameters:
 ap-name
 lms
 wired-mac
ip Clears all IP information from DHCP bindings, IGMP groups and IP mobility configuration. Use
the following parameters:
 dhcp
 igmp
 mobile
ipc Clears all inter process communication statistics.
ipv6 Clears all IPv6 session statistics, multicast listener discovery (MLD) group and member
information, MLD statistics, and counters. Use the following parameters:
 datapath session counters
 mld group
 mld stats-counters
loginsession Clears loginsession information for a specific login session, as identified by the session id.
master-local-entry Clears local controller information from the master controller LMS list. Specify the IP address
of the local controller to be removed from master controller active LMS list.
master-local-session Clear and reset master local TCP connection. Specify the IP address of either the master or
local controller.
port Clear all port statistics that includes link-event counters or all counters. Use the following
parameters:
 link-event
 stats
provisioning-ap-list Clear AP entries from the provisioning list.
Parameter Description