Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide apflash | 143
apflash
apflash all|{ap-group <group>}|{ap-name <name>}|{ip-addr <ipaddr>}|{wired-mac
<macaddr>} global|local [backup-partition] [server <ipaddr>]
Description
This command reflashes the specified AP.
Syntax
Usage Guidelines
This command directs an AP to download its image from the controller. You should not normally need to run this
command, since APs automatically download their images from a controller during bootup.
Example
The following command reflashes a specific AP:
(host) (config) #apflash ap-name Building3-Lobby
Command History
Command Information
Parameter Description
all Reflash all connected APs.
ap-group Reflash the APs in the specified AP group.
ap-name Reflash the AP with the specified name.
ip-addr Reflash the AP at the specified IP address.
wired-mac Reflash the AP at the specified MAC address.
global Reflash APs on all switches
local Reflash APs registered on this controller only (default)
server IP address of the FTP server.
Version Description
ArubaOS 3.0 Command Introduced
ArubaOS 6.0 The global and local parameters were introduced.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config modes on master controllers