Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show papi-security | 937
show papi-security
show papi-security
Description
This command shows a configured papi-security profile.
Syntax
Usage Guidelines
Issue this command to show the selected papi-security profile configuration. The papi-security command is used
to enforce advanced security options and provides an enhanced level of security.
The Parameter column displays the PAPI Key and Enhanced security mode parameters. The Value column
displays a Papi key value (encrypted) and indicates whether the Enhanced security mode is enabled or disabled. If
an AP cannot be authenticated because it has the wrong key, the show ap database command displays a “Bad key”
status.
.
Related Commands
Use the command papi-security to configure a papi-security profile.
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Parameter Description Range Default
PAPI Key The key string. The key authenticates the messages
between systems.
Range: 10–64
characters
—
Enhanced security
mode
Indicates if the enhanced security mode is enabled or
disabled. This mode causes the system to reject
messages when an incorrect key is used.
— disabled
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master or local
controllers
(host) #show papi-security
PAPI Security Profile
---------------------
Parameter Value
--------- -----
PAPI Key ********
Enhanced security mode Enabled