Reference Guide

927 | show netstat Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Example
The following example shows incoming and outgoing packet statistics for the controller.
Related Commands
To configure an alias for network protocols, use the command netservice.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on local and master controllers
(host) #show netstat stats
Ip:
1084012095 total packets received
2 with invalid headers
3 forwarded
426940 incoming packets discarded
932097114 incoming packets delivered
1004595164 requests sent out
52847 fragments dropped after timeout
201323411 reassemblies required
50179757 packets reassembled ok
53204 packet reassembles failed
136827034 fragments created
Icmp:
1969625 ICMP messages received
5 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1752058
timeout in transit: 1684
redirects: 70805
echo requests: 145073
echo replies: 5
249806 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 51944
time exceeded: 52796
redirect: 2
echo replies: 145064
Tcp:
3 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
1006383 segments received
1147229 segments send out
9603 segments retransmitted
0 bad segments received.
2568 resets sent
Udp:
928478757 packets received
40767 packets to unknown port received.
426937 packet receive errors
910267627 packets sent