Reference Guide

811 | show ids rate-thresholds-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ids rate-thresholds-profile
show ids rate-thresholds-profile <profile-name>
Description
Show an IDS Rate Thresholds profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS Rate Threshold profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has eight configured IDS Rate Threshold Profiles.
This example displays the configuration settings for the profile probe-request-response-thresholds.
The output of this command includes the following parameters:.
Parameter Description
<profile-name> Name of an IDS Rate Threshold profile.
Parameter Description
Channel Increase Time Time, in seconds, in which the threshold must be
exceeded in order to trigger an alarm.
Channel Quiet Time The time that must elapse after a channel rate alarm before another identical alarm may be
triggered. This option prevents excessive messages in the log file.
(host) # show ids rate-thresholds-profile
IDS Rate Thresholds Profile List
--------------------------------
Name References Profile Status
---- ---------- --------------
def-assoc-thresholds 1
def-auth-thresholds 1
def-deauth-thresholds 1
def-disassoc-thresholds 1
def-probe-request-thresholds 1
def-probe-response-thresholds 1
default 18
probe-request-response-thresholds 6 Predefined
Total:8
(host) # show ids rate-thresholds-profile probe-request-response-thresholds
IDS Rate Thresholds Profile "probe-request-response-thresholds" (Predefined)
----------------------------------------------------------------------------
Parameter Value
--------- -----
Channel Increase Time 30 sec
Channel Quiet Time 900 sec
Channel Threshold 350
Node Time Interval 10 sec
Node Quiet Time 900 sec
Node Threshold 250