Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show global-user-table count | 796
show global-user-table count
show global-user-table
show global-user-table count
[current-switch] <IP address>
[authentication-method] {dot1x | mac | stateful-dot1x | vpn | web}
[role] <role name>
[bssid] <bssid MAC>
[essid] <essid>
[ap-name] <AP name>
[phy-type] {a | b | g}
[age] <starting time dd:hh:mm> <ending time dd:hh:mm>
Description
This command displays a count of global user based on the specified criteria.
Syntax
Example
Issue this command to display a global user count.The output shown below is a result of the command show
global-user-table count current-switch <ip-address>.
The output includes the following parameters:
Command History
This command was introduced in ArubaOS 3.4.
Parameter Description
current-switch Match IP address of the switch where the user is currently associated
authentication-method Count users matching the specified authentication method
role Count users matching the specified role
bssid Count users matching the specified BSSID
essid Count users matching the specified ESSID. If the ESSID includes spaces, you must enclose it
in quotation marks.
ap-name Count users matching the specified AP name
phy-type Count users matching the specified Phy type
age Count users matching the specified age
Parameter Description
The number of global
users:
Total number of global users meeting the specified criteria.
Complete results.
The number of global users : 2