Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show firewall | 793
Related Commands
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Rate limit CP trusted
ucast traffic
Displays the trusted unicast traffic rate limit.
Rate limit CP trusted
mcast traffic
Displays the trusted multicast traffic rate limit.
Rate limit CP route
traffic
Displays the traffic rate limit for traffic that needs generated ARP requests.
Rate limit CP session
mirror traffic
Displays the traffic rate limit for session mirrored traffic forwarded to the controller.
Rate limit CP auth
process traffic
Displays the traffic rate limit for traffic forwarded to the authentication process.
Deny inter user traffic If enabled, this setting disables the forwarding of Layer-2 traffic between wired or wireless
users. You can configure user role policies that prevent Layer-3 traffic between users or
networks but this does not block Layer-2 traffic.
Session mirror IPSEC If enabled, rrames are sent to IP address specified by the
session-mirror-destination
option.
Command Description Mode
firewall This command configures firewall options on the
controller.
Config mode
firewall cp This command creates whitelist session ACLs Config mode
firewall cp-bandwidth-
contract
This command configures bandwidth contract
traffic rate limits to prevent denial of service
attacks.
Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers
Parameter Description