Reference Guide

784 |show esi ping Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show esi ping
show esi ping [ping-name <ping-name>]
Description
Show settings for ESI ping health check attributes.
Syntax
Example
This example below shows that the controller has three defined sets of ping attributes.
The output of this command includes the following information:
Related Commands
Command History
This command was introduced in ArubaOS 2.5.
Parameter Description
ping-name <ping-name> Include the optional ping-name <ping-name> parameters to display settings for one specified
set of ping settings.
Column Description
Name Name of a group of ping settings.
frequency Specifies the ping frequency in seconds.
timeout Specifies the ping timeout in seconds.
retry-count Specifies the ping retry count
ID ID number assigned to the ping attributes when that set of attributes was defined.
Num Groups Number of ESI groups to which this set of ping attributes is assigned.
Platforms Licensing Command Mode
esi ping This command specifies the ESI ping
health check configuration.
Config mode on master or local controllers.
(host) #show esi groups
ESI Ping Table
--------------
Name Frequency (sec) Timeout (sec) Retry Count ID Num Groups
---- --------------- ------------- ----------- -- ----------
ping_att1 5 2 2 0 1
ESIping 5 2 2 1 0
ESIping2 50000 2 2 2 2