Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show datapath | 761
maintenance counters Displays datapath maintenance statistics.
message-queue counters Displays statistics of messages received by a CPU from other datapath CPUs (only CPUs
that receive messages and non-zero statistics are shown).
nat Displays the contents of the datapath NAT entries table. It displays NAT pools as
configured in the datapath. Statistics include pool, SITP start, SIP end and DIP.
ap-name <ap-name> Name of AP.
counters Nat counters.
ip-addr <ip-address> IP address of the AP.
port table Displays the datapath port-vlan untrusted status and table session entries.
untrusted-vlan <slot/
port>
Show if there are untrusted vlan entries for the indicated slot and port.
vlan-table <slot/
port>
Displays the VLAN and its corresponding Session ACL for a particular slot and port.
route Displays datapath route table statistics.
ap-name <ap-name> Name of the AP.
counters Displays route table statistics such as current entries, high water mark, maximum entries,
total entries, allocation failures and max link length.
ip-addr <ip-address> Address of IP.
table Displays route table entries such as IP, mask, gateway, cost, VLAN and flags.
verbose Displays all detailed route table entries including IP, mask, gateway, cost, VLAN, flags,
Internal VerNum Index.
route-cache Displays datapath route cache table statistics.
ap-name <ap-name> Name of the AP.
counters Displays route cache table statistics such as current entries, high water mark, maximum
entries, total entries, allocation failures and max link length.
ip-addr <ip-address> Address of IP.
table Displays route cache table entries such as IP, mask, gateway, cost, VLAN and flags.
verbose Displays all detailed route cache table entries including IP, mask, gateway, cost, VLAN,
flags, Internal VerNum Index.
services Displays the datapath services table statistics including protocol, port and service.
session Displays datapath session statistics
ap-name <ap-name> Name of AP
counters Displays counters statistics including current entries, high water mark, maximum entries,
total entries, allocation failures, duplicate entries, cross linked entries, number of reverse
entries and maximum link length.
ip-addr <ip-address> Address of IP
table Displays all the IP flows of a wireless device or Dell AP. Statistics include table entries
including source IP, destination IP, protocol, SPort, DPort, Cntr, priority, ToS, age,
destination, TAge and flags.
station Displays datapath station association table statistics.
Parameter Description