Reference Guide

757 |show crypto-local pki Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show crypto-local pki
show crypto pki {PublicCert|ServerCert|TrustedCA} <name> <filename>
Descriptions
This command displays imported certificate information.
Syntax
Usage Guidelines
Use the show crypto-local pki command to view the name, original filename and reference count for an imported
public, server or trusted CA certificates.
Example
This example displays information about an imported Server certificate. Both the Public and Trusted Ca
certificate parameters display similar information.
Related Commands
Command History
This command was introduced in ArubaOS 3.1.
Command Information
Parameter Description
PublicCert <name> Shows Public key information of a certificate. This certificate allows an application to identify
an exact certificate.
ServerCert <name> Shows Server certificate information. This certificate must contain both a public and a private
key (the public and private keys must match). You can import a server certificate in either
PKCS12 or x509 PEM format; the certificate is stored in x509 PEM DES encrypted format on the
controller.
TrustedCA <name> Shows trusted CA certificate information.This certificate can be either a root CA or
intermediate CA. Dell encourages (but does not require) an intermediate CA’s signing CA to be
the controller itself.
Command Description Mode
crypto-local pki This command is saved in the configuration file and
verifies the presence of the certificate in the controller’s
internal directory structure.
Enable mode
Platforms Licensing Command Mode
All platforms Base operating system Enable mode.
(host) (config) #show crypto-local pki serverCert
Name(total=1) Original Filename Reference Count
============== ================= ===============
sialdevice 2400a.pem 1