Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show crypto-local ipsec-map | 752
show crypto-local ipsec-map
show crypto-local ipsec [tag <ipsec-map-name>]
Description
Displays the current IPsec map configuration on the controller.
Syntax
Usage Guidelines
The command show crypto-local ipsec displays the current IPsec configuration on the controller.
Examples
The command show crypto-local ipsec-map shows the default map configuration along with any specific IPsec
map configurations.
Parameter Description
tag <ipsec-map-name> Display a specific IPsec map.
(host) #show crypto-local ipsec-map
Crypto Map Template"default-local-master-ipsecmap" 9999
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-ml-transform }
Peer gateway: 0.0.0.0
Interface: VLAN 0
Source network: 0.0.0.0/0.0.0.0
Destination network: 0.0.0.0/0.0.0.0
Pre-Connect (Y/N): N
Tunnel Trusted (Y/N): Y
Forced NAT-T (Y/N): N
Crypto Map Template"testmap" 3
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-transform }
Peer gateway: 0.0.0.0
Interface: VLAN 0
Source network: 0.0.0.0/0.0.0.0
Destination network: 0.0.0.0/0.0.0.0
Pre-Connect (Y/N): N
Tunnel Trusted (Y/N): N
Forced NAT-T (Y/N): N