Reference Guide

707 | show ap system-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Command History
Introduced in ArubaOS 3.0.
LMS Hold-down Period Time, in seconds, that the primary LMS must be available before an AP returns to that LMS
after failover.
Master controller IP
address
For multi-controller networks, this parameter displays the IP address of the master controller.
LED operating mode
(AP-12x only)
Displays the LED operating mode for W-AP120 series APs. LEDs display as usual in the default
normal operating mode, but are all turned off in off mode.
RF Band For dual-band radios, this parameter displays the RF band in which the AP should operate:
z g = 2.4 GHz
z a = 5 GHz
Double Encrypt This parameter applies only to remote APs. Double encryption is used for traffic to and from a
wireless client that is connected to a tunneled SSID. When enabled, all traffic is re-encrypted
in the IPsec tunnel. When disabled, the wireless frame is only encapsulated inside the IPsec
tunnel.
Native VLAN ID Native VLAN for bridge mode virtual APs (frames on the native VLAN are not tagged with
802.1q tags).
SAP MTU Maximum Transmission Unit (MTU) size, in bytes. This value describes the greatest amount of
data that can be transferred in one physical frame.
Bootstrap threshold Number of consecutive missed heartbeats on a GRE tunnel (heartbeats are sent once per
second on each tunnel) before an AP rebootstraps. On the controller, the GRE tunnel timeout
is 1.5 x bootstrap-threshold; the tunnel is torn down after this number of seconds of inactivity
on the tunnel.
Dump Server (For debugging purposes.) Displays the server to receive the core dump generated if an AP
process crashes.
Telnet Reports whether telnet access the AP is enabled or disabled.
SNMP sysContact SNMP system contact information.
RFprotect Server IP The IP address of the RFprotect server for this AP or group
RFprotect Backup
Server IP
The IP address of the RFprotect backup server for this AP or group
AeroScout RTLS Server IP address of an AeroScout real-time asset location (RTLS) server.
Heartbeat DSCP DSCP value of AP heartbeats (0-63).
Session ACL Shows the access control list (ACL) applied on the uplink of a remote AP.
Corporate DNS Domain DNS name used by the corporate network.
Maintenance Mode Shows if Maintenance mode is enabled or disabled. If enabled, APs stop flooding
unnecessary traps and syslog messages to network management systems or network
operations centers when deploying, maintaining, or upgrading the network. The controller still
generates debug syslog messages if debug logging is enabled.
Remote-AP Local
Network Access
Shows if Remote-AP Local Network Access is enabled or disabled. By enabling this option,
the clients that are connected to a RAP can communicate.
Note: By default, the Remote-AP Local Network Access will be disabled.
Column Description