Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap monitor debug | 642
Syntax
Examples
The output of the following command includes the WLAN Interface, Data Structures, WLAN Interface Switch
Status and RTLS Configuration tables for the specified AP.
Parameter Description
counters Show Air Monitor (AM) message counters.
status Show the status of an Air Monitor.
ap-name <ap-name> Show data for an AM with a specific name.
bssid <bssid> Show data for an AM with a specific Basic Service Set Identifier (BSSID). The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr> Show data for an AM with a specific IP address by entering its IP address in
dotted-decimal format.
profile-config Show an Air Monitor profile configuration.
ap-radio Show the Air Monitor radio configuration parameters, as defined in the AM’s
802.11a, 802.11b, or high-throughput radio profiles.
ap-system Show an Air Monitor’s system configuration settings, as defined in it’s AP System
profile.
arm Show an Air Monitor’s Adaptive Radio Management (ARM) settings, as defined in
its current ARM profile
event-thresholds Show an Air Monitor Event Thresholds settings, as defined in its current RF Event
Thresholds profile
ids-dos Show an Air Monitor IDS DoS settings, as defined in its current IDS DoS profile.
ids-general Show an Air Monitor IDS General Configuration settings, as defined in its IDS
General profile.
ids-impersonation Show an Air Monitor IDS Impersonation Configuration settings, as defined in its
IDS Impersonation profile.
ids-signature-matching Show an Air Monitor IDS Signature Matching configuration settings, as defined in
its IDS Signature Matching profile
ids-unauthorized-device Show an Air Monitor IDS Unauthorized Device configuration settings, as defined in
its IDS Unauthorized Device profile.
interference Show an Air Monitor’s interference configuration settings, as defined in its current
RF Optimization profile.
regulatory-domain Show an Air Monitor’s Regulatory Domain configuration settings, as defined in its
Regulatory Domain profile.
rf-behavior Show an Air Monitor RF Behavior Configuration