Reference Guide

637 |show ap monitor Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Examples
The output of the command displays the Monitored AP Table, which lists all the APs monitored by a specified AP
or BSSID.
The output of this command includes the following information:
Command History
(host) #show ap monitor ap-list ap-name al12
Monitored AP Table
------------------
bssid essid chan ap-type phy-type dos mt it load-balance
----- ----- ---- ------- -------- --- -- -- ------------
00:1a:1e:11:5f:02 ethersphere-vocera 6 valid 80211b/g-HT-20 disable 787272 0 disable
00:1a:1e:11:5f:00 guest 6 valid 80211b/g-HT-20 disable 787272 0 disable
00:1a:1e:11:5f:11 ethersphere-wpa2 48 valid 80211a-HT-40 disable 786835 0 disable
00:1a:1e:11:5f:10 guest 48 valid 80211a-HT-40 disable 786835 0 disable
00:1a:1e:11:5f:01 ethersphere-voip 6 valid 80211b/g-HT-20 disable 787272 0 disable
00:1a:1e:11:6e:70 guest 48 valid 80211a-HT-40 disable 18543 0 disable
00:1a:1e:11:6e:71 ethersphere-wpa2 48 valid 80211a-HT-40 disable 18543 0 disable
00:1a:1e:88:90:42 employee4a 6 unknown 80211b/g disable 3160 0 disable
00:1a:1e:88:90:41 guest4 6 unknown 80211b/g-HT-20 disable 3160 0 disable
00:1a:1e:88:90:40 employee4 6 unknown 80211b/g-HT-20 disable 3159 0 disable
00:1a:1e:8e:73:e1 guest10 6 unknown 80211b/g-HT-20 disable 941 0 disable
00:1a:1e:8e:73:e0 emplyee10 6 unknown 80211b/g-HT-20 disable 910 0 disable
00:1a:1e:8e:73:f0 emplyee10 48 unknown 80211a-HT-40 disable 252 0 disable
00:1a:1e:8e:73:f1 guest10 48 unknown 80211a-HT-40 disable 252 0 disable
00:1a:1e:8d:5b:30 guest 48 valid 80211a-HT-40 disable 189 0 disable
00:1a:1e:8d:5b:31 ethersphere-wpa2 48 valid 80211a-HT-40 disable 189 0 disable
00:1a:1e:85:89:20 employee8 11 unknown 80211b/g-HT-20 disable 9 9 disable
00:1a:1e:85:89:21 guest8 11 unknown 80211b/g-HT-20 disable 9 9 disable
00:1a:1e:88:dd:60 employee2 11 unknown 80211b/g-HT-20 disable 9 9 disable
0 repeat
Length:19
Total:19
Column Description
bssid Basic Service Set Identifier for an AP. This is usually the AP’s MAC address.
essid Extended service set identifier that names a wireless network.
chan Radio channel used by the BSSID
phy-type Radio phy type. Possible types include:
z 802.11a
z 802.11a-HT-40
z 802.11b/g
z 802.11b/g-HT-20
dos Shows if the feature to contain DoS attacks has been enabled or disabled.
mt Monitor time; the number of elapsed timer ticks since the AP first recognized the monitored AP.
it AP idle time, the number of timer-ticks since the AP last saw any frames from the monitored
AP.
load-balance Shows if the load-balancing feature has been enabled on the AP.
Version Modification
ArubaOS 3.0. Command introduced