Reference Guide

629 | show ap mesh-cluster-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap mesh-cluster-profile
show ap mesh-cluster-profile [<profile>]
Description
Show configuration settings for a mesh cluster profile.
Syntax
Usage Guidelines
The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the
controller, including the number of references to each profile and each profile’s status. Include the optional
<profile> parameter to show detailed settings for an individual mesh cluster profile.
Examples
The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.2.
Parameter Description
<profile> Name of a mesh cluster profile
Parameter Description
Cluster Name Name of the mesh cluster using this profile
RF band The RF band in which the AP should operate:
z g = 2.4 GHz
z a = 5 GHz
Encryption Data encryption setting for the mesh cluster profile.
z opensystem—No authentication and encryption.
z wpa2-psk-aes—WPA2 with AES encryption using a preshared key.
WPA Hexkey The WPA pre-shared key (only for mesh cluster profiles using WPA2 with AES encryption).
WPA Passphrase The WPA password that generates the preshared key (only for mesh cluster profiles using
WPA2 with AES encryption).
(host) #show ap mesh-cluster-profile meshcluster2
Mesh Cluster profile "meshcluster2"
------------------------------
Parameter Value
--------- -----
Cluster Name company-mesh
RF Band a
Encryption opensystem
WPA Hexkey N/A
WPA Passphrase N/A