Reference Guide

615 | show ap mesh debug counters Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap mesh debug counters
show ap mesh debug counters {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show counters statistics for a mesh node.
Syntax
Example
The example below shows the Mesh Packet Counters table for an AP named meshpoint1. The Probe Resp, Assoc
Req, and Assoc Resp data columns show both the total number of counters and, in parenthesis, the number of
requests or responses with high-throughput information elements (HE IEs).
The output of this command includes the following information:
Parameter Description
ap-name <ap-name> Show counter statistics for an AP with a specific name.
bssid <bssid> Show counter statistics for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s
BSSID is usually the AP’s MAC address.
ip-addr <ip-addr> View counter statistics for an AP with a specific IP address. Enter the IP address of the AP in
dotted-decimal format.
(host) #show ap mesh debug counters ap-name meshpoint1
Mesh Packet Counters
--------------------
Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail Link up/
down Resel. Switch Other Mgmt
--------- --------- --------- --------- ---------- --------- ---------- ---------- --------
---- ------ ------ ------
Parent 68865 68755 24 8(8 HT) 3(1 HT) 3(1 HT) 1 1
- - 0
Child 68913 67373 6 8 2 2 0 1
2 0 2618886
Received Packet Statistics: Total 2890717, Mgmt 2618946 (dropped non-mesh 0), Data 271771 (dropped
unassociated 1)HT: pns=8 ans=1 pnr=0 ars=0 arr=1 anr=0
Recovery Profile Usage Counters
-------------------------------
Column Description
Interface Indicates whether the mesh interface connects to a Parent AP or a Child AP. Each row of data in the
Mesh Packet Counters table shows counter values for an individual interface.
Echo Sent Number of echo packets sent.
Echo Recv Number of echo packets received.
Probe Req Number of probe request packets sent from the interface specified in the Mesh-IF parameter.
Probe Resp Number of probe response packets sent to the interface specified in the Interface parameter.
Assoc Req Number of association request packets from the interface specified in the Interface parameter.