Reference Guide

571 | show ap debug client-table Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Command History
Introduced in ArubaOS 3.0.
Command Information
UAPSD This parameter shows the following values for Unscheduled Automatic Power Save Delivery (UAPSD) in
comma-separated format: VO, VI, BK, BE, Max SP, Q Len.
z VO: If 1, UAPSD is enabled for the VoIP access category. If UAPSD is disabled for this access
category, this value is 0.
z VI: If 1, UAPSD is enabled for the Video access category. If UAPSD is disabled for this access
category, this value is 0.
z BK: If 1, UAPSD is enabled for the Background access category. If UAPSD is disabled for this access
category, this value is 0.
z BE: If 1, UAPSD is enabled for the Best Effort access category. If UAPSD is disabled for this access
category, this value is 0.
z Max SP: The maximum service period is the number of frame sent per trigger packet. This value is
value can be 0, 2, 4 or 8.
z Q Len: The number of frames currently queued for the client, from 0 to 16 frames.
Tx_Pkts Number of packets transmitted by the client.
Rx_Pkts Number of packets received by the client.
PS-Qlen Power save queue length, in bytes.
Tx_Retries Number of packets that the client had to resend due to an initial transmission failure.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Parameter Description