Reference Guide

563 | show ap debug bss-stats Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Command History
Introduced in ArubaOS 3.0.
Last SNR CTL0 The signal-to-noise ratio for the last received data packet on the primary (control) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last SNR CTL1 The signal-to-noise ratio for the last received data packet on the secondary (control) channel
1. This parameter is only displayed for APs operating in 40 Mhz mode.
Last SNR CTL2 The signal-to-noise ratio for the last received data packet on the secondary (control) channel
2. This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR Signal-to-noise ratio for the last received ACK packet.
Last ACK SNR CTL0 Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0. This
parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR CTL1 Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1. This
parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR CTL2 Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2. This
parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT0 Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT1 Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel 1.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT2 Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel 2.
This parameter is only displayed for APs operating in 40 Mhz mode.
Frames Received Number of frames received.
Rx Data Frames Number of data frames received.
Null Data Frames Number of null data frames received.
Rx Mgmt Frames Number of management frames received.
Control Frames Number of control frames received.
Frames To Me Number of wireless frames received that are addressed to the specified BSSID.
Probe Requests Number of probe requests.
PS Poll Frames Number of Power Save poll frames
Rx 6 Mbps Number of frames received at 6 Mbps.
Rx 9 Mbps Number of frames received at 9 Mbps.
Rx 12 Mbps Number of frames received at 12 Mbps.
Rx 18 Mbps Number of frames received at 18 Mbps.
Rx 24 Mbps Number of frames received at 24 Mbps.
Rx 36 Mbps Number of frames received at 36 Mbps.
Rx 48 Mbps Number of frames received at 48 Mbps.
Rx 54 Mbps Number of frames received at 54 Mbps.
Parameter Description