Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap config | 544
show ap config
show ap config {ap-group <ap-group>}|{ap-name <ap-name>}|{essid <essid>}
Description
Show a large list of configuration settings for an ap-group or an individual AP.
Syntax
Examples
The example output below shows just some of the configuration settings displayed in the output of this
command
.
Parameter Description
ap-group <ap-group> Display configuration settings for an AP group.
ap-name <ap-name> Display configuration settings for an AP with a specific name.
essid <essid> Display configuration settings for an AP with a specific Extended Service Set Identifier
(ESSID). An Extended Service Set Identifier (ESSID) is a alphanumeric name that uniquely
identifies a wireless network. If the name includes spaces, you must enclose the ESSID in
quotation marks.
show ap config ap-group apgroup14
---------------------------------------------------
Parameter 802.11g 802.11a Source
--------- ------- ------- ------
LMS IP N/A N/A ap system-profile
"default"
Backup LMS IP N/A N/A ap system-profile
"default"
LMS Preemption Disabled Disabled ap system-
profile "default"
LMS Hold-down Period 600 sec 600 sec ap system-profile
"default"
Master controller IP address N/A N/A ap system-profile
"default"
RF Band g g ap system-profile
"default"
Double Encrypt Disabled Disabled ap system-profile
"default"
Native VLAN ID 1 1 ap system-profile
"default"
SAP MTU N/A N/A ap system-profile
"default"
Bootstrap threshold 8 8 ap system-profile
"default"
Request Retry Interval 10 sec 10 sec ap system-profile
"default"
Maximum Request Retries 10 10 ap system-profile
"default"
Keepalive Interval 60 sec 60 sec ap system-profile
"default"
Dump Server N/A N/A ap system-profile
"default"
Telnet Disabled Disabled ap system-profile