Reference Guide

525 | show ap arm scan-times Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap arm scan-times
show ap arm scan-times {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show AM channel scan times for an individual AP.
Syntax
Examples
The output of this command shows scan times for every channel on an AP with the IP address 10.15.10.37.
Parameter Description
ap-name <ap-name> Show channel scan data for an AP with a specific name.
bssid <bssid> Show channel scan data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s BSSID
is usually the AP’s MAC address.
ip-addr <ip-addr> Show channel scan data for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
(host)# show ap arm scan-times ip-addr 10.15.10.37
Channel Scan Time
-----------------
channel assign-time scans-attempted scans-rejected dos-scans flags timer-tick
------- ----------- --------------- -------------- --------- ----- ----------
36 8579 349 0 0 DVACT 50598
40 2365 349 0 0 DVACT 50610
44 2495 349 0 0 DVACT 50621
48 9714 349 0 0 DVACT 50656
52 0 349 0 0 DA 50643
56 0 349 0 0 DA 50655
60 0 348 0 0 DA 50519
64 0 348 0 0 DA 50530
149 5546 348 0 0 DVACT 50542
153 2310 348 0 0 DVACT 50553
157 6094 348 0 0 DVACT 50565
161 3014 348 0 0 DVACT 50576
165 10538 348 0 0 DVACT 50587
1 4194 97 0 0 DVACT 50594
2 0 97 0 0 DAC 50604
3 0 97 0 0 DAC 50615
4 0 97 0 0 DAC 50627
5 0 97 0 0 DC 50638
6 4076 97 0 0 DVACT 50656
7 0 96 0 0 DAC 50538
8 0 97 0 0 DC 50549
9 0 97 0 0 DC 50561
10 0 97 0 0 DAC 50572
11 3710 97 0 0 DVACT 50583