Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap arm neighbors | 522
show ap arm neighbors
show ap arm neighbors {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the ARM settings for an AP’s neighbors.
Syntax
Examples
The output of this command shows ARM neighbor information for both the wifi1 and wifi0 interfaces on AP
ap70_1.
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name <ap-name> Show data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID). An AP’s BSSID is usually the
AP’s MAC address.
ip-addr <ip-addr> Show data for an AP with a specific IP address. Enter the IP address in dotted-decimal format.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
(host)# show ap arm neighbors ap70_1
Interface:wifi1
00:1b:2f:e6:1c:d0:known-interfering/SNR-1/CH-1
00:19:e3:31:55:f2:known-interfering/SNR-7/CH-1
00:1f:f3:01:4d:3f:known-interfering/SNR-1/CH-1
00:18:39:96:b4:16:known-interfering/SNR-0/CH-1
00:11:24:ec:49:05:known-interfering/SNR-0/CH-1
Interface:wifi0
00:19:7e:4d:8a:1d:known-interfering/SNR-0/CH-1
00:19:a9:ce:13:90:interfering/SNR-0/CH-4
00:19:7e:4d:80:df:known-interfering/SNR-0/CH-1
00:11:24:90:17:d4:known-interfering/SNR-0/CH-1
00:16:b6:f4:59:94:known-interfering/SNR-0/CH-1
00:14:51:6d:d1:d5:known-interfering/SNR-0/CH-1