Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show aaa derivation-rules | 465
show aaa derivation-rules
show aaa derivation-rules [server-group <group-name>|user <name>]
Syntax
Description
Show derivation rules based on user information or configured for server groups.
Example
The output of the following command shows that the server group group1 has the internal database configured as
its authentication server, and that there is a single rule assigned to that group. You can omit the <group-name>
parameter to show a table of all your server groups.
The following data columns appear in the output of this command:
Parameter Description
<group-name> Name of a server group
<name> Name of a user rule group
Parameter Description
Name Name of the authentication server assigned to this server group
Inservice Specifies if the server is in service or out-of-service.
trim-FDQN If enabled, user information in an authentication request is edited before the request is sent to
the server.
match-FDQN If enabled, the authentication server is associated with a specified domain.
Priority The priority in which the rules are applied. Rules at the top of the list are applied before rules
at the bottom.
Attribute This is the attribute returned by the authentication server that is examined for Operation and
Operand match
(host) #show aaa derivation-rules server-group group1
Server Group
Name Inservice trim-FQDN match-FQDN
---- --------- --------- ----------
Internal Yes No
Server Rule Table
-----------------
Priority Attribute Operation Operand Action Value Total Hits New Hits
-------- --------- --------- ------- ------ ----- ---------- --------
1 Filter-Id equals nsFilter set vlan 111 24 0
Rule Entries: 1