Reference Guide

Table Of Contents
464 | show aaa bandwidth-contracts Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show aaa bandwidth-contracts
show aaa bandwidth-contracts
Description
This command shows the contract names, ID numbers and Rate limits for your bandwidth contracts.
Example
The output of the following command shows that the bandwidth contract VLAN has a configured rate of 6
Mbps, and the contract User has a rate of 2048 Kbps.
Related Commands
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Command Description Mode
aaa bandwidth-contract Use this command to define contracts to limit traffic for a
user or VLAN.
Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
(host) #show aaa bandwidth-contracts
Bandwidth Contracts
-------------------
Contract Id Rate (bits/second)
-------- -- ------------------
VLAN 1 6000000
User 2 2048000
Total contracts = 2
Per-user contract total = 4096
Per-user contract usage = 0