Reference Guide

51 | aaa authentication-server windows Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
aaa authentication-server windows
aaa authentication-server windows <windows_server_name>
clone <source>
enable
host <ipaddr>
Description
This command configures a windows server for stateful-NTLM authentication.
Syntax
Usage Guidelines
You must define a Windows server before you can add it to one or more server groups. You create a server group
for a specific type of authentication (see “aaa server-group” on page 70). Windows servers are used for stateful-
NTLM authentication.
Example
The following command configures and enables a windows server:
aaa authentication-server windows IAS_1
host 10.1.1.245
enable
Command History
This command was available in ArubaOS 3.4.1
Command Information
Parameter Description
<windows_server_name> Name of the windows server. You will use this name when you add the windows
server to a server group.
clone <source> Name of a Windows Server from which you want to make a copy.
enable Enables the Windows server.
host <ipaddr> IP address of the Windows server.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers