Reference Guide

460 | show aaa authentication-server windows Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show aaa authentication-server windows
show aaa authentication-server windows [<windows_server_name>]
Description
Display configuration settings for your Windows servers.
Syntax
Examples
The output of the example below displays the Windows server list with the names of all the Windows servers
used for NTLM authentication. The References column lists the number of other profiles that reference a
Windows server, and the Profile Status column indicates whether the profile is predefined. User-defined profiles
will not have an entry in the Profile Status column.
Include the <windows_server_name> parameter to display additional details for an individual server.
The output of this command includes the following parameters:
Command History
This command was introduced in ArubaOS 3.4.1.
Parameter Description
<windows_server_name> Name that identifies a Windows server.
Parameter Description
host IP address of the Windows server
Mode Shows whether this server is Enabled or Disabled.
Windows Domain Name of the Windows domain to which this server is assigned.
(host) #aaa authentication-server tacacs
Windows Server List
----------------
Name References Profile Status
---- ---------- --------------
NTLM 1
Windows2 1
Total:2
(host) #show aaa authentication-server windows Windows2
Windows Server "windows"
------------------------
Parameter Value
--------- -----
Host 172.21.18.170
Mode Enabled
Windows Domain MyCompanyDomain