Reference Guide

458 | show aaa authentication-server tacacs Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show aaa authentication-server tacacs
show aaa authentication-server tacacs [<tacacs_server_name>]|statistics
Description
Display configuration settings for your TACACS+ servers.
Syntax
Examples
The output of the example below displays the TACACS+ server list with the names of all the TACACS+ servers.
The References column lists the number of other profiles that reference a TACACS+ server, and the Profile
Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the
Profile Status column.
Include the <tacacs_server_name> parameter to display additional details for an individual server.
The output of this command includes the following parameters:
Parameter Description
<tacacs_server_name> Name that identifies an TACACS+ server.
statistics Displays accounting, authorization, and authentication request and response statistics for the
TACACS server.
Parameter Description
host IP address of the TACACS+ server
Key Shared secret between the controller and the authentication server.
TCP Port
TCP port used by the server.
(host) #aaa authentication-server tacacs
TACACS Server List
----------------
Name References Profile Status
---- ---------- --------------
LabAuth 5
TACACS1 3
Total:2
(host) #show aaa authentication-server tacacs tacacs1
TACACS Server "tacacs1"
---------------------
Parameter Value
--------- -----
Host 10.1.1.16
Key ********
TCP Port 49
Retransmits 3
Timeout 20 sec
Mode Enabled