Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show aaa authentication via connection-profile | 443
Related Commands
Command History
This command was introduced in ArubaOS 5.0.
Command Information
VIA IKE Policy List of IKE policies that the VIA Client has to use to connect to the controller.
Use Windows Credentials Enable or disable the use of the Windows credentials to login to VIA. If enabled, the SSO
(Single Sign-on) feature can be utilized by remote users to connect to internal resources.
Default: Enabled
VIA IPSec Crypto Map List of IPSec Crypto Map that the VIA client uses to connect to the controller. These IPSec
Crypto Maps are configured in CLI using the crypto-local ipsec-map <ipsec-
map-name> command.
Allow user to save passwords Enable or disable users to save passwords entered in VIA.
Default: Enabled
VIA Client Network Mask The network mask that has to be set on the client after the VPN connection is established.
Default: 255.255.255.255
Validate Server Certificate Enable or disable VIA from validating the server certificate presented by the controller.
Default: Enabled
VIA Client DNS Suffix List The DNS suffix list (comma separated) that has be set on the client once the VPN connection
is established.
Default: None.
VIA max session timeout The maximum time (minutes) allowed before the VIA session is disconnected.
Default: 1440 min
VIA Support E-mail Address The support e-mail address to which VIA users will send client logs.
Default: None.
Maximum reconnection
attempts
The maximum number of re-connection attempts by the VIA client due to authentication
failures.
Default: 3
VIA external download URL End users will use this URL to download VIA on their computers.
Allow user to disconnect VIA Enable or disable users to disconnect their VIA sessions.
Default: on
Command Description Mode
aaa authentication
via connection-
profile
Use aaa authentication via connection-
profile to configure the parameters displayed in the
output of this show command.
Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Configuration Option Description