Reference Guide

430 | show aaa authentication dot1x Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Related Commands
Command History
This command was introduced in ArubaOS 3.0.
Command Information
TLS Guest Access Shows if guest access for valid EAP-TLS users is enabled or disabled.
TLS Guest Role User role assigned to EAP-TLS guest.
Ignore EAPOL-START after
authentication
If enabled, the controller ignores EAPOL-START messages after
authentication.
Handle EAPOL-Logoff Shows if handling of EAPOL-LOGOFF messages is enabled or disabled.
Ignore EAP ID during negotiation If enabled, the controller will Ignore EAP IDs during negotiation.
WPA-Fast-Handover Shows if WPA-fast-handover is enabled or disabled. This feature is only
applicable for phones that support WPA.
Disable rekey and reauthentication
for clients on call
Shows if the rekey and reauthentication features for voice-over-WLAN
clients has been enabled or disabled.
Command Description Mode
aaa authentication
dot1x
If you do not yet have any 802.1x authentication profiles
defined, use the command aaa authentication
dot1x to configure your 802.1x profiles.
Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Parameter Value