Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show aaa authentication captive-portal | 423
Include a captive portal profile name to display a complete list of configuration settings for that profile. The
example below shows settings for the captive portal profile portal1.
The output of this command includes the following parameters:
Parameter Description
Default Role Role assigned to the captive portal user upon login.
Server Group Name of the group of servers used to authenticate captive portal users.
Redirect Pause Time, in seconds, that the system remains in the initial welcome page before redirecting the
user to the final web URL. If set to 0, the welcome page displays until the user clicks on the
indicated link.
User Login Shows whether the profile has enabled or disabled captive portal with authentication of user
credentials.
Guest Login Shows whether the profile has enabled or disabled captive portal guest login without
authentication.
Logout popup window Shows whether the profile has enabled or disabled a pop-up window that allows a user to log
out. If this is disabled, the user remains logged in until the user timeout period has
elapsed or the station resets.
Use HTTP for
authentication
Shows whether the profile has enabled or disabled the ability to use the HTTP protocol to
redirect users to the captive portal page.
Login wait minimum
time
Minimum time, in seconds, the user will have to wait for the logon page to pop up if the CPU
load is high.
logon wait CPU
utilization threshold
CPU utilization percentage above which the logon wait interval is applied when directing a
captive portal user with the logon page.
Max Authentication
failures
Maximum number of authentication failures before the user is blacklisted.
Show FQDN If enabled, the user can see and select the fully-qualified domain name (FQDN) on the captive
portal login page.
Use CHAP (non-
standard)
If enabled, the captive portal profile can use the CHAP protocol.
Captive Portal Authentication Profile "portal1"
------------------------------------------------
Parameter Value
--------- -----
Default Role guest
Server Group default
Redirect Pause 10 sec
User Login Enabled
Guest Login Disabled
Logout popup window Enabled
Use HTTP for authentication Disabled
Logon wait minimum wait 5 sec
Logon wait maximum wait 10 sec
logon wait CPU utilization threshold 60%
Max Authentication failures 0
Show FQDN Disabled
Use CHAP (non-standard) Disabled
Sygate-on-demand-agent Disabled
Login page /auth/index.html
Welcome page /auth/welcome.html
Show Welcome Page Yes
Adding switch ip address in redirection URL Disabled
Allow only one active user session Disabled