Reference Guide

352 | packet-capture-defaults Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Use the show packet-capture command to show the current action and the default values.
Command History
This command was introduced in ArubaOS 2.3.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
(host) show packet-capture
Current Active Packet Capture Actions(current switch)
=====================================================
Packet filtering TCP with 2 port(s) enabled:
2
1
Packet filtering UDP with 1 port(s) enabled:
1
Packet filtering for internal messaging opcodes disabled.
Packet filtering for all other packets disabled.
Packet Capture Defaults(across switches and reboots if saved)
============================================================
Packet filtering TCP with 2 port(s) enabled:
2
1
Packet filtering UDP with 1 port(s) enabled:
1