Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ids general-profile | 220
Syntax
Parameter Description Range Default
<profile-name> Name that identifies an instance of the profile. The
name must be 1-63 characters.
— “default”
adhoc-ap-inactivity-timeout Ad hoc (IBSS) AP inactivity timeout in number of
scans.
5-36000
seconds
5 seconds
adhoc-ap-max-unseen-timeout Ageout time in seconds since ad hoc (IBSS) AP
was last seen.
5-36000
seconds
5 seconds
ap-inactivity-timeout Time, in seconds, after which an AP is aged out. 5-36000
seconds
5 seconds
ap-max-unseen-timeout Ageout time, in seconds, since AP was last seen. 5-36000
seconds
600
seconds
clone Name of an existing IDS general profile from
which parameter values are copied.
——
ids-events [logs-and-traps |
logs-only | none | traps-only]
Enable or disable IDS event generation from the
AP. Event generation from the AP can be enabled
for syslogs, traps, or both. This does not affect
generation of IDS correlated events on the switch.
— logs-and-
traps
min-pot-ap-beacon-rate Minimum beacon rate acceptable from a potential
AP, in percentage of the advertised beacon
interval.
0-100 25%
min-pot-ap-monitor-time Minimum time, in seconds, a potential AP has to be
up before it is classified as a real AP.
2-36000 2 seconds
mobility-manager-rtls Enable/disable RTLS communication with the
configured mobility-manager
enabled
disabled
disabled
mon-stats-update-interval Time interval, in seconds, for AP to update the
switch with stats for monitored devices. Minimum
is 60.
60-360000
seconds
60 seconds
no Negates any configured parameter. — —
send-adhoc-info-to-controller Enable or disable sending Adhoc information to
the controller from the AP.
enable
disable
disable
signature-quiet-time After a signature match is detected, the time to
wait, in seconds, to resume checking.
60-360000
seconds
900
seconds
sta-inactivity-timeout Time, in seconds, after which a station is aged out. 30-360000
seconds
60 seconds
sta-max-unseen-timeout Ageout time, in seconds, since station was last
seen. Minimum is 5.
5-36000
seconds
5 seconds
stats-update-interval Interval, in seconds, for the AP to update the
controller with statistics. This setting takes effect
only if the Mobility Manager is configured.
Otherwise, statistics update to the controller is
disabled.
60-360000
seconds
60 seconds
wired-containment Enable containment from the wired side. true
false
fals
e
wired-containment-ap-adj-mac Enable/disable wired containment of MACs offset
by one from APs BSSID.
true
false
false