Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ids ap-classification-rule | 210
ids ap-classification-rule
id-classification-rule <rule-name>
check-min-discovered-aps
classify-to-type [neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt <discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Description
Configure the AP classification rule profile.
Syntax
Usage Guidelines
Paragraph describing command usage
Example
The following example configures the AP Configuration Rule Profile named “rule1”:
(host) (config) #ids ap-classification-rule rule1
(host) (IDS AP Classification Rule Profile "rule1") #check-min-discovered-aps
(host) (IDS AP Classification Rule Profile "rule1") #classify-to-type neighbor
Parameter Description Range Default
<rule-name> Enter the AP classification rule profile name. — —
check-min-discovered-aps Have the rule check for the minimum number of
APs
true
false
true
classify-to-type
[neighbor | suspected-rogue]
Specify if the type the AP will be classified,
neighbor or suspected-rogue, if the rule is
matched.
— suspected-
rogue
clone Copy data from another AP classification rule
profile
——
conf-level-incr Increase the confidence level (in percentage)
when the rule matches
0-100 5
discovered-ap-cnt
<discovered-ap-cnt>
Enter the keyword discovered-ap-cnt followed by
the number of APs to be discovered.
0-100 0
match-ssids Match SSIDs; match or do not match true
false
false
no Negates any configured parameter — —
snr-max <value> Use the maximum SNR value 0-100 0
snr-min <value> Use the minimum SNR value 0-100 0
ssid <ssid> Enter the keyword ssid followed by the SSID string
to be matched or excluded
——