Reference Guide

143 |clear Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Syntax
Parameter Description
aaa Clear all values associated with authentication profile
authentication-
server
Provide authentication server details to clear values specific to an authentication server or all
authentication server.
Parameters:
z all—to clear all server statistics.
z internal—to clear Internal server statistics.
z radius—to clear RADIUS server statistics.
z tacacs—to clear TACACS server statistics.
state Clear internal status of authentication modules.
Parameters:
z configuration—clear all configured objects.
z debug-statistics—clear debug statistics.
z messages—clear authentication messages that were sent and received.
acl Clear ACL statistics.
hits Clear ACL hit statistics
ap Clear all AP related information.
arm Clear information on AP.
mesh Clear all mesh commands.
port Toggle the link on the specified port.
remote Clear all information related to remote configuration.
arp Clear all ARP table information. You can either clear all information or enter the IP address of
the ARP entry to clear a specific value.
counters Clear all interface configuration values.
fastethernet Clears configuration related to fastethernet ports.
gigabitethernet Clears configuration related to fastethernet ports.
tunnel Clears all tunnel configuration values on interface ports.
vrrp Clears all VRRP configuration values on interface ports.