Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wms general | 1123
show wms general
show wms general
Description
Display general statistics for the wms configuration.
Syntax
No parameters.
Example
This example shows per-channel statistics for all monitored APs.
The output of this command includes the following information:
Column Description
poll-interval Interval, in milliseconds, for communication between the controller and AMs. The controller
contacts the AM at this interval to download AP to station associations, update policy
configuration changes, and download AP and station statistics.
poll-retries Maximum number of failed polling attempts before the polled AM is considered to be down.
ap-ageout-interval Time, in minutes, that an AP must remain unseen by any probes before it is deleted from the
database.
sta-ageout-interval Time, in minutes, that an client must unseen by any probes before it is deleted from the
database.
learn-ap Enables “learning” of non-Dell APs.
persistent-known-
interfering
If enabled, APs that are marked as known interfering from being aged out.
propagate-wired-MACs Shows if the controller has enabled or disabled the propagation of the gateway wired MACs.
stat-update Shows if the controller has enabled or disabled WMS statistics updates in the database.
collect-stats If enabled, if the master controller will collect up to 25,000 statistic entries for monitored APs
and clients.
(host) #show wms general
General Attributes
------------------
Key Value
--- -----
poll-interval 176000
poll-retries 2
ap-ageout-interval 30
sta-ageout-interval 30
learn-ap enable
persistent-known-interfering disable
propagate-wired-macs enable
stat-update enable
collect-stats enable
classification-server-ip 10.4.151.19
rtls-port 0
wms-on-master disable
use-db disable
calc-poll-interval 176000
Switch IP 10.6.2.253
Is Master enable