Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wlan voip-cac-profile | 1113
The output of this command includes the following data columns:
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
VoIP Call Admission Control Shows if the profile enables or disables WiFi VoIP Call Admission Control
features.
VoIP Bandwidth based CAC Shows the desired call admission control (CAC) Mechanism:
z Disable - CAC is based on Call Counts
z Enable - CAC should be based on Bandwidth.
VoIP Call Capacity Number of simultaneous calls that can be handled by one radio.
VoIP Bandwidth Capacity (kbps) The maximum bandwidth that can be handled by one radio, in kbps.
VoIP Call Handoff Reservation Percentage of call capacity reserved for mobile VoIP clients on call.
VoIP Send SIP 100 Trying Shows if the profile enables or disables sending of SIP 100 - trying messages to a
call originator to indicate that the call is proceeding.
VoIP Disconnect Extra Call If enabled, the controller disconnects calls that exceed the high capacity
threshold by sending a deauthentication frame.
VOIP TSPEC Enforcement Shows if the profile enables or disables validation of TSPEC requests for CAC.
VOIP TSPEC Enforcement Period Maximum time for the station to start the call after the TSPEC request
VoIP Drop SIP Invite and send
status code (client)
Display the status code sent back to the client if the profile is configured to drop
a SIP Invite:
z 480: Temporary Unavailable
z 486: Busy Here
z 503: Ser vice Unavailable
z none: Don't send SIP status code
VoIP Drop SIP Invite and send
status code (server)
Display the status code sent back to the server if the profile is configured to drop
a SIP Invite:
z 480: Temporary Unavailable
z 486: Busy Here
z 503: Ser vice Unavailable
z none: Don't send SIP status code
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.