Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show vpdn l2tp configuration | 1090
show vpdn l2tp configuration
show vpdn l2tp configuration
Description
Displays the VPN L2TP tunnel configuration.
Syntax
No parameters.
Example
The output of this command shows the L2TP tunnel configuration.
Command History
This command was available in ArubaOS 3.0
Command Information
(host) # show vpdn l2tp configuration
Enabled
Hello timeout: 30 seconds
DNS primary server: 10.16.15.1
DNS secondary server: 10.16.14.1
WINS primary server: 0.0.0.0
WINS secondary server: 0.0.0.0
PPP client authentication methods:
PAP
IP LOCAL POOLS:
vpnpool: 10.16.15.150 - 10.16.15.160
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers