Reference Guide

999 | show rf dot11g-radio-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Command History
Command Information
Management Frame Throttle Limit Maximum number of management frames that can come in from this radio in each throttle
interval.
ARM/WIDS Override If enabled, this option disables Adaptive Radio Management (ARM) and Wireless IDS
functions and slightly increases packet processing performance. If a radio is configured to
operate in Air Monitor mode, then the ARM/WIDS override functions are always enabled,
regardless of whether or not this check box is selected.
Protection for 802.11b Clients Shows if the profile has enabled or disabled protection for 802.11b clients.
Adaptive Radio Management
(ARM) Profile
Name of an Adaptive Radio Management profile associated with this 802.11a profile.
High-throughput Radio Profile Name of a High Throughput Radio profile associated with this 802.11a profile.
Maximum Distance Maximum distance between a client and an AP or between a mesh point and a mesh
portal, in meters. This value is used to derive ACK and CTS timeout times. A value of 0
specifies default settings for this parameter, where timeouts are only modified for outdoor
mesh radios which use a distance of 16km.
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.3.2 Introduced protection for 802.11b clients and support for the high-throughput IEEE 802.11n
standard
ArubaOS 3.4 Support for the following parameters:
z Spectrum load balancing
z RX Sensitivity Tuning Based Channel Reuse
z RX Sensitivity Threshold
z ARM/WIDS Override
ArubaOS 3.4.2 Support for the Beacon Regulate parameter
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
Parameter Description