Release Notes

interface vlan ipv6
interface vlan <vlan ID>
ipv6 {address <ipv6-address> link-local | [<ipv6-prefix>/<prefix-length> | eui-64]
ipv6 dhcp server <pool-name>
ipv6 mld [snooping]
ipv6 nd {ra [dns | enable | hop-limit | interval | life-time | managed-config-flag | mtu |
other-config-flag | preference | prefix] | reachable-time <value> | retransmit-time
<value>}}
Description
This command configures the IPv6 link local address or the global unicast address, and the IPv6 router
advertisement parameters for this interface.
Syntax
Parameter Description Range Default
<ipv6 address> link-local
Configures the specified IPv6 address as
the link local address for this interface.
— —
<ipv6-prefix>/<prefix-length>
Specify the IPv6 prefix/prefix-length to
configure the global unicast address for this
interface.
— —
eui-64
Specify this optional parameter to configure
the global unicast address in Extended
Universal Identifier 64 bit format (EUI-64)
for this interface.
— —
ipv6 dhcp server <pool-name>
Specify the DHCPv6 server pool name for
this VLAN. The configured DHCPv6 pool sub-
net must match the interface prefix for
DHCPv6 Server to be active.
— —
ipv6 nd
Configures the IPv6 neighbor discovery
options for router advertizement
functionality.
— —
ra
Configures the following router
advertisement options:
l dns—Configures IPv6 recursive DNS
server.
l enable—Enables IPv6 RA.
l hop-limit—Configures RA hop-limit.
l interval—Configures RA interval.
l life-time—Configures RA lifetime.
l managed-config-flag—Enables hosts
to use DHCP server for stateful address
autoconfiguration
l mtu—Configures maximum
transmission unit for RA.
l other-config-flag—Enables hosts to
use DHCP server for other non-address
stateful autoconfiguration.
l preference—Configures a router
preference.
— —
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide interface vlan ipv6 | 430