Release Notes

Parameter Description Range Default
dot11g-radio-profile
Configures 802.11g radio settings and load
balancing for the AP group; contains the
ARM profile. See rf dot11a-radio-profile on
page 664.
— “default”
dot11g-traffic-mgmt-profile
Configures bandwidth allocation. See wlan
traffic-management-profile on page 2079.
— —
enet0-port-profile
Configures the duplex and speed of the
Ethernet interface 0 on the AP. For
information on how these profiles are
defined, see ap wired-port-profile on page
204.
— “default”
enet1-port-profile
Configures the duplex and speed of the
Ethernet interface 1 on the AP. For
information on how these profiles are
defined, see ap wired-port-profile on page
204.
— “default”
enet2-port-profile
Configures the duplex and speed of an
Ethernet interface 2 on the AP. These
profiles are defined using the command ap
wired-port-profile on page 204.
— “default”
enet3-port-profile
Configures the duplex and speed of an
Ethernet interface 3 on the AP. These
profiles are defined using the command ap
wired-port-profile on page 204.
— “default”
enet4-port-profile
Configures the duplex and speed of an
Ethernet 4 interface on the AP. For
information on how these profiles are
defined, see ap wired-port-profile on page
204.
— “default”
event-thresholds-profile
Configures Received Signal Strength
Indication (RSSI) metrics. See rf event-
thresholds-profile on page 685.
— “default”
ids-profile
Configures Dell’s Intrusion Detection
System (IDS). See ids profile on page 381.
— “default”
mesh-cluster-profile
Configures the mesh cluster profile for
mesh nodes that are members of the AP
group. There is a “default” mesh cluster
profile; however, it is not applied until you
provision the mesh node. See ap mesh-
cluster-profile on page 161.
— “default”
priority
Configures the priority of the mesh cluster
profile. If more than two mesh cluster
profiles are configured, mesh points use
this number to identify primary and backup
profile(s).
The lower the number, the higher the
priority.
1-16 1
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ap-group | 212