Release Notes

web-server
web-server
captive-portal-cert <name>
ciphers {high|low|medium}
idp-cert <idp-cert>
mgmt-auth [certificate] [username/password]
no ...
session-timeout <session-timeout>
ssl-protocol [sslv2] [sslv3] [tlsvl]
switch-cert <name>
web-https-port-443
web-lync-listen-port {http <listen-port>}|{https <listen-port>}
web-max-clients <web-max-clients>
Description
This command configures the controller’s web server.
Syntax
Parameter Description Range Default
captive-portal-cert
Specifies the name of the server
certificate associated with captive
portal. Use the show crypto-local
pki ServerCert command to see the
server certificates installed in the
controller.
— default
ciphers
Configures the strength of the cipher
suite:
high: encryption keys larger than
128 bits
low: 56 or 64 bit encryption keys
medium: 128 bit encryption keys
NOTE: This command is
not available in FIPS software
images because ciphers are pre-
configured only to acceptable
values.
high, low,
medium
high
idp-cert
Specifies the IDP certificate name con-
figured in the controller
— —
mgmt-auth
Specifies the authentication method
for the management user; you can
choose to use either
username/password or certificates,
or both username/password and
certificates.
username/
password,
certificate
username/
password
no
Negates any configured parameter. — —
session-timeout <session-timeout>
Specifies the amount of time after
which the WebUI session times out
and requires login for continued
access.
30-3600
seconds
900
seconds
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide web-server | 1986