Release Notes

1931 | threshold Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
threshold
threshold
controlpath-cpu <percentage>
controlpath-memory <percentage>
datapath-cpu <percentage>
no-of-APs <percentage>
no-of-locals <percentage>
total-tunnel-capacity <percentage>
user-capacity <percentage>
no ...
Description
This command configures controller capacity thresholds which, when exceeded, will trigger alerts.
Syntax
Parameter Description
controlpath-cpu <percentage>
Set an alert threshold for controlpath CPU capacity.
The <percentage> parameter is the percentage of
the total controlpath CPU capacity that must be
exceeded before the alert is sent.
The default threshold for this parameter is 80%.
controlpath-memory <percentage>
Set an alert threshold for controlpath memory
consumption. The <percentage> parameter is the
percentage of the total memory capacity that must
be exceeded before the alert is sent.
The default threshold for this parameter is 85%.
datapath-cpu <percentage>
Set an alert threshold for datapath CPU capacity.
The <percentage> parameter is the percentage of
the total datapath CPU capacity that must be
exceeded before the alert is sent.
The default threshold for this parameter is 30%.
no-of-APs <percentage>
The maximum number of APs that can be
connected to a controller is determined by that
controller’s model type and installed licenses. Use
this command to trigger an alert when the number
of APs currently connected to the controller exceeds
a specific percentage of its total AP capacity.
The default threshold for this parameter is 80%.
no-of-locals <percentage>
Set an alert threshold for the master controller’s
capacity to support remote nodes and local
controllers.
A master controller can support a combined total of
256 remote nodes and local controllers. The
<percentage> parameter is the percentage of the
total master controller capacity that must be
exceeded before the alert is sent. The default
threshold for this parameter is 80%.