Release Notes

Parameter Description
h2qp-conn-capability-profile
Shows a list of all H2QP Connection Capability profiles
h2qp-op-cl-profile
Shows a list of all H2QP Operating Class Indication profiles
h2qp-operator-friendly-profile
Shows a list of all H2QP Operator Friendly Name profiles
h2qp-wan-metrics-profile
Shows a list of all H2QP WAN Metrics profiles
hs2-profile
Shows a list of all Hotspot 2.0 profiles
ht-ssid-profile
Show a list of all high-throughput SSID profiles
traffic-management-profile
Show a list of all traffic management profiles
virtual-ap
Show a list of all the virtual AP profiles
voip-cac-profile
Show a list of all voice over IP (VoIP) call admission control
(CAC) profiles
wmm-traffic-management-profile
Show a list of all WMM traffic management profiles
Example
The output of this command shows that the controller has a single ARM profile, “default”.
(host) # show profile-list rf arm-profile
Adaptive Radio Management (ARM) profile List
--------------------------------------------
Name References Profile Status
---- ---------- --------------
default 2
Total:1
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.3 The dot11r prarameter was introduced.
ArubaOS 6.4 The hotspot parameters were introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show profile-list wlan | 1586