Release Notes

Column Description
msg-hash
Number of different message types seen on the interface.
ap-l
(For internal use only)
WMS on Master
Indicates if the AP communicates to the wms process on a master or local
controller.
enabled: Communicates with a master controller.
disabled: Communicates with a local controller only.
Stats Update Interval
If the AP is collecting statistics, this value is the interval in seconds in which the
AP sends statistics to the WMS process on a controller.
Poll Interval
Interval, in milliseconds, that the AP sends RSSI updates to the WMS process
on a controller.
Num Switches
Number of controllers to which this AP has access. If the value is 1, the AP has
access to a master or a local controller. If the value is 2, the AP has access to a
master and a local controller.
Collect Stats
If enabled, the AP will collect statistics to send the WMS process on its
controller.
Bssid
BSSID of the radio.
Type
Indicates whether the controller type is master or local.
Status
If up, the AP can reach the controller. If down, the AP cannot reach the
controller.
Last-reg
The time the AP last registered with the WMS process.
N-reg
Number of times the AP has registered with the WMS process.
Last-update
The last timer tick time the AP updated the WMS process.
Next-update
Interval between the last update and the next scheduled update.
N-updates
Number of updates sent to the WMS process.
Last-ack
Number of timer ticks since the AP received an acknowledgement from the
WMS process.
Type
Type of RTLS server used by the AP, such as MMS or Aeroscout.
Server IP
IP address of the RTLS server.
Port
Port used by the RTLS server.
Frequency
Rate, in seconds, at which RTLS messages are sent to the server.
Active
Indicates if the server is active on the AP.
Rpt-Tags Displays whether tag reporting is enabled or not.
Tag-Mcast-Addr Displays MAC OUI of the tags that are forwarded to the server.
Tags-Sent Displays the cumulative count of the tag reports sent to server.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap monitor debug | 1088