Release Notes

Parameter Description
LLDP-MED application VLAN
Indicates the VLAN ID (0-4094) or
VLAN name of the VLAN used by the
application.
LLDP-MED application VLAN tagging
Indicates if the policy applies to a to
a VLAN that is tagged with a VLAN ID
or untagged. The default value is
untagged.
NOTE: When an LLDP-MED network
policy is defined for use with an
untagged VLAN, then the L2 priority
field is ignored and only the DSCP
value is used.
LLDP-MED application Layer-2 priority
Displays a configured 802.1p priority
level for the specified application
type, where 0 is the lowest priority
level and 7 is the highest priority.
LLDP-MED application Differentiated Services Code Point
Displays a configured Differentiated
Services Code Point (DSCP) priority
value for the specified application
type, where 0 is the lowest priority
level and 63 is the highest priority.
Command History
Command introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable or Config mode on master or local controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap lldp med-network-policy-profile | 1046